№3-2025-05
DOI: https://doi.org/10.22281/2413-9920-2025-11-03-265-277
УДК 625.084
Казаков О.Ю., Савельев А.Г.
Обоснование направления вращения рабочего органа комбинированного уплотняющего оборудования для асфальтобетонных смесей
В статье рассматривается следующий аспект работы разрабатываемого комбинированного уплотняющего оборудования для асфальтобетонных смесей: исследование и обоснование оптимального направления вращения рабочих органов с точки зрения качества готового покрытия. В качестве рассматриваемых рабочих органов предлагается использовать гладкие вальцы многократного воздействия, вращающиеся вокруг собственных осей с эксцентриситетом. Представленные данные и схемы дают наглядное представление о наиболее важных процессах и явлениях, влияющих на выброс материала перед рабочим органом и, как следствие, величину призмы волнообразования. Данный параметр выбран как показатель обеспечения качества готового покрытия. Разработан и сконструирован лабораторный стенд, позволивший провести ряд экспериментов по сформулированным методикам. Конструкция стенда, за счёт гибкости и широкого списка регулируемых параметров, позволяет провести глубокий анализ и наблюдение за работой уплотняющего органа в виде вальца со смещенной осью вращения. Проведено два эксперимента по пять повторений, результаты которых зафиксированы и систематизированы. Анализ полученных результатов подтверждает гипотезу о том, что уплотнение вращающимся рабочим органом следует производить от неуплотнённого материала к уплотнённому. Это позволит уменьшить количество дефектов покрытия (таких как трещины), повысит ровность и гладкость покрытия, а также снизит расслоение уплотняемого материала.
Ключевые слова: уплотнение асфальтобетона, комбинированное уплотняющее оборудование, лабораторный стенд.
Kazakov O.Yu., Saveliev A.G.
Justification of the direction of rotation of the working body of the combined sealing equipment for asphalt concrete mixtures
The article deals with the following aspect of the work of the developed combined compacting equipment for asphalt concrete mixtures: research and substantiation of the optimal direction of rotation of working bodies from the point of view of the quality of the finished pavement. It is proposed to use smooth rollers of multiple impact rotating around their own axes with eccentricity as working bodies under consideration. The presented data and schemes give a visual representation of the most important processes and phenomena affecting the ejection of material in front of the working body and, as a consequence, the size of the wave formation prism. This parameter is chosen as an indicator of quality assurance of the finished coating. A laboratory bench was designed and constructed, which allowed to conduct a number of experiments on the formulated methods. The design of the stand, due to its flexibility and a wide list of adjustable parameters, allows for in-depth analysis and observation of the work of the compacting organ in the form of a roller with an offset axis of rotation. Two experiments with five repetitions each were conducted, and the results were recorded and systematized. The analysis of the obtained results confirms the hypothesis that compaction by rotating working body should be performed from the unconsolidated material to the compacted one. This will reduce the number of coating defects (such as cracks), increase the evenness and smoothness of the coating, and reduce the delamination of the compacted material.
Key words: asphalt concrete compaction, combined compaction equipment, laboratory stand/em>.
Скачать статью (файл pdf) — Download (pdf)
Это произведение доступно по лицензии Creative Commons «Attribution-ShareAlike» («Атрибуция — На тех же условиях») 4.0 Всемирная.